13. Study of the stress and strain state of the multilayer bellows

13. Study of the stress and strain state of the multilayer bellows

Vasilieva T. N., Strunin K. A., Onofrienko V. I.

Yangel Yuzhnoye State Design Office, Dnipro, Ukraine.

Kosm. teh. Raket. vooruž. 2019, (2); 96-102
https://doi.org/10.33136/stma2019.02.096
 
Language: Russian
Annotation:
Strength calculation example of the specific design bellows is taken to consider one of the possible approaches to the numerical simulation of the stress and strain state of the multilayer bellows. Proposed approach is based on the use of axial symmetry of the structure for transition from 3D calculation model to 2D one. Calculations take place in the elastoplastic setup, using the software package of the finite elements method. As an example of the proposed approach static and fatigue strength of the three-layer steel bellows of the Cyclone-4M fuel supply line are calculated. Calculation of the static strength of the bellows, loaded with internal pressure, showed that layer stresses achieve yield strength, at the same time preserving the bearing capacity of the structure. Results of the simulated change in the stress and strain state of the bellows per one cycle of the variable reloading were taken to find the amplitude of the plastic deformations in the most loaded area of the bellows, which allowed estimation of its fatigue strength in the conditions of lowcycle loading. Advantage of the proposed approach to the multilayer bellows strength evaluation is that it does not require large volumes of RAM and time to do the calculations.
Key words: computer simulation, finite element method, calculation model, strength.

Bibliography:

1. GOST 21744-83. Silfony mnogosloynye metallicheskie. Obschie technicheskie uslovia. 72 s.
2. Prochnost’, ustoychivost’, kolebaniya: spravochnil; v 3-kh t. / pod red. I. A. Birgera, Ya. G. Panovko. M., 1968. T. 2. 462 s.
3. Grabin B. V., Davydov O. I., Zhikharev V. I. i dr. Osnovy konstruirovaniya raket-nositeley kosmicheskykh apparatov: uchebnik dlya studentov vuzov / pod red. V. P. Mishina, V. K. Karraska. M., 1991. 416 s.
4. Silfony. Raschet i proektirovanie / pod red. L. Y. Andreevoy. M., 1975. 156 s.
5. Issledovanie vliyaniya tekhnologicheskykh operatsiy na kachestvo izgotovleniya silfonov iz lenty staly marki DIN 1.4541 EN 1099-2 pri razlichnykh temperaturno-silovykh vozdeistviyakh i vibratsiyakh v processe izgotovleniya i ispytaniy: techn. otchet № 3 М-13 / PO YMZ im. A. M. Makarova». Dnepropetrovsk. 2013. 13 s.
6. Pisarenko G. S., Yakovlev A. P., Matveev V. V. Spravochnik po soprotivleniyu materialov / otv. red. Pisarenko G. S. 2-e izd., pererab. i dop. Kiev. 1988. 736 s.
7. Gusenkov A. P., Moskvitin G. M., Khoroshilov V. N. Malotsiklovaya prochnost’ obolochechnykh konstruktsiy. M., 1989. 254 s.
8. Kogaev V. P., Makhutov N. A., Gusenkov A. P. Raschety detaley mashin na prochnost’ i dolgovechnost’: spravochnik. M., 1985. 224 s.
9. DSTU EN 10088-2:2010. Stali nerzhavki. Ch. 2. List i strichka z koroziynotryvkykh staley zagalnoi pryznachenosti. Technichni umovy postachannya. 42 s.

Full Text (PDF) || Content 2019 (2)