20. Research Support for Development of Launch Vehicle Payload Unit Composite Load-Bearing Compartments

20. Research Support for Development of Launch Vehicle Payload Unit Composite Load-Bearing Compartments

Potapov А. М., Kovalenko V. А., Kondrat’ev А. V., Gaidachuk V. Е.

Yangel Yuzhnoye State Design Office, Dnipro, Ukraine

Kharkiv Aviation Institute, Kharkiv, Ukraine

Kosm. teh. Raket. vooruž. 2017 (2); 112-120
 
Language: Russian
Annotation:
Some main results of scientific support of development of launch vehicle head module composite loadbearing bays are presented. The methodology is proposed for developing these units. By the example of payload fairing and interstage bay of Cyclone-4 launch vehicle, high efficiency is shown of proposed methodology implementation when selecting their rational design and technological parameters.

Bibliography:

1. Degtyarev A. V. Rocket Technology. Problems and Prospects. Selected scientific-technical publications. Dnepropetrovsk, 2014. 420 p.
2. Kovalenko V. A., Kondrat’yev A. V. Use of Polymer Composite Materials in Space Rockets as Reserve of Increasing their Mass and Functional Effectiveness. Aerospace Engineering and Technology. 2011. No. 5 (82). P. 14-20.
3. Kondrat’yev A. V. et al. Analysis of Nomenclature of Type Composite Units of Space Rockets and Structural Schemes Applied for them / A. V. Kondrat’yev, A. G. Dmitrenko, K. D. Stenile, А. А. Tsaritsynsky. Problems of Designing and Manufacturing Flying Vehicle Structures: Collection of scientific works of N. E. Zhukovsky Aerospace University “KhAI”. Issue 3 (79). Kharkiv, 2014. P. 19 – 30.
4. Potapov A. M. et al. Comparison of Payload Fairings of Existing and Prospective Domestic Launch Vehicles and their Foreign Analogs / А. М. Potapov, V. A. Kovalenko, A. V. Kondrat’yev. Aerospace Engineering and Technology. 2015. No. 1(118). P. 35 – 43.
5. Gaidachuk A. V. et al. Methodology of Developing Effective Design and Technological Solutions of Space Rocketry Composite Units: Monography in 2 volumes. Vol. 2. Synthesis of Space Rocketry Composite Units Parameters at Heterogeneous Loading / A. V. Gaidachuk, V. E. Gaidachuk, A. V. Kondrat’yev, V. A. Kovalenko, V. V. Kirichenko, А. M. Potapov / Under the editorship of A. V. Gaidachuk. Kharkiv, 2016. 250 p.
6. Gaidachuk A. V. et al. Methodology of Developing Effective Design and Technological Solutions of Space Rocketry Composite Units: Monography in 2 volumes. Vol. 1. Creation of Space Rocketry Units with Specified Quality of Polymer Composite Materials / A. V. Gaidachuk, V. E. Gaidachuk, A. V. Kondrat’yev, V. A. Kovalenko, V. V. Kirichenko, А. M. Potapov / Under the editorship of A. V. Gaidachuk. Kharkiv, 2016. 263 p.
7. Smerdov A. A. Development of Methods to Design Space Rocketry Composite Materials and Structures: Dissertation of Doctor of Engineering Science: 05.07.02, 05.02.01. М., 2007. 410 p.
8. Slyvyns’kyy V. et al. Basic parameters’ optimization concept for composite nose fairings of launchers / V. Slyvyns’kyy, V. Gajdachuk, V. Kirichenko, A. Kondratiev. 62nd International Astronautical Congress, IAC 2011 (Cape Town, 3-7 October 2011). Red Hook, NY: Curran, 2012. Vol. 9. P. 5701-5710.
9. Gaidachuk V. E. et al. Optimization of Cyclone-4 Launch Vehicle Payload Fairing Design Parameters / V. E. Gaidachuk, V. I. Slivinsky, A. V. Kondrat’yev, A. P. Kushnar’ov, Effectiveness of Honeycomb Structures in Aerospace Products: Proceedings of III International Scientific-Practical Conference (Dnepropetrovsk, 27-29 May 2009). Dnepropetrovsk, 2009. P. 88 – 95.
10. Zinov’yev A. M. et al. Design and Technological Solution and Carrying Capacity of Cyclone-4 Launch Vehicle Interstage Bay Made of Polymer Composite Materials / А. М. Zinov’yev, А. P. Kushnar’ov, A. V. Kondrat’yev, А. М. Potapov, А. P. Kuznetsov, V. A. Kovalenko. Aerospace Engineering and Technology. 2013. No. 3 (100). P. 46-53.
11. Karpov Y. S. Connection of Parts and Units Made of Composite Materials: Monography. Kharkiv, 2006. 359 p.
12. Kondrat’yev A. V. Mass Optimization of Launch Vehicle Payload Fairing Irregular Zones. Problems of Designing and Manufacturing Flying Vehicle Structures: Collection of scientific works of N. E. Zhukovsky Aerospace University “KhAI”. Issue 47 (4). Kharkiv, 2006. P. 126 – 133.
13. Degtyarev A. V. et al. Evaluation of Carrying Capacity of Launch Vehicle Bays Separation System Composite Fitting / A. V. Degtyarev, A. P. Kushnar’ov, V. V. Gavrilko, V. A. Kovalenko, А. V. Kondrat’yev, А. М. Potapov. Space Technology. Missile Armaments: Collection of scientific-technical articles. 2013. Issue 1. P. 18-21.
14. Patent 81537 UA, MPK (2013.01) F42B 15/36 (2006.01) B64D 1/00 Fitting of Rocket’s Three-Layer Shell / О. М. Zinov’yev, О. P. Kuznetsov, V. V. Gavrilko, О. М. Potapov, V. O. Kovalenko et al.; Applicant and patent holder NVF Dniprotechservice, Yuzhnoye SDO. No. u 2012 11210; Claimed 27.09.2012; Published 10.07.13, Bulletin 13. 4 p.
15. Zinov’yev A. M. et al. Manufacturing Technology of Cyclone-4 Launch Vehicle Experimental Large-Sized Interstage Bay Made of Carbon Plastics / А. M. Zinov’yev, А. P. Kushnar’ov, А. V. Kondrat’yev, А. М. Potapov, А. P. Kuznetsov, V. A. Kovalenko. Problems of Designing and Manufacturing Flying Vehicle Structures: Collection of scientific works of N. E. Zhukovsky Aerospace University “KhAI”. Issue 2 (74). Kharkiv, 2013. P. 7 – 17.
16. Zinov’yev A. M. et al. Static Tests of Cyclone-4 Launch Vehicle Experimental Interstage Bay Made of Carbon Plastic / А. М. Zinov’yev, А. P. Kushnar’ov, А. V. Kondrat’yev, А. М. Potapov, А. P. Kuznetsov, V. A. Kovalenko. Aerospace Engineering and Technology. 2013. No. 4(101). P. 28-35.

Full Text(PDF) Content 2017 (2)