Search Results for “Kovalenko M. D.” – Collected book of scientific-technical articles https://journal.yuzhnoye.com Space technology. Missile armaments Tue, 02 Apr 2024 12:35:08 +0000 en-GB hourly 1 https://journal.yuzhnoye.com/wp-content/uploads/2020/11/logo_1.svg Search Results for “Kovalenko M. D.” – Collected book of scientific-technical articles https://journal.yuzhnoye.com 32 32 10.2.2019 Dynamic performance of the gas drive with jet motor https://journal.yuzhnoye.com/content_2019_2-en/annot_10_2_2019-en/ Tue, 03 Oct 2023 11:52:15 +0000 https://journal.yuzhnoye.com/?page_id=32366
2019, (2); 71-79 DOI: https://doi.org/10.33136/stma2019.02.071 Language: Russian Annotation: The use of servo drives on flying vehicles determines the requirements to their dynamic characteristics. The purpose of this work is to develop mathematical dependences for calculation of dynamic characteristics. Based on the proposed algorithms, the dynamic characteristics of servo drive were constructed: transient process and amplitude-frequency characteristic. Kamladze, A. A., Kovalenko V. Prikladnaya gazovaya dynamika. Dynamicheskaya model’ sharikovintovoi pary/ Izv. The Dynamics of Lead-Screw Drivers: Low-Order Modeling and Experiments /Journal of Dynamic System, Measurement and Control.
]]>

10. Dynamic performance of the gas drive with jet motor

Authors:

Oliinyk V. P., Kaluger L. G.

Organization:

Yangel Yuzhnoye State Design Office, Dnipro, Ukraine

Page: Kosm. teh. Raket. vooruž. 2019, (2); 71-79

DOI: https://doi.org/10.33136/stma2019.02.071

Language: Russian

Annotation: The use of servo drives on flying vehicles determines the requirements to their dynamic characteristics. The problems of dynamics of drive with jet motor are not practically covered in publications. The task arises of selection of structure and parameters of devices consisting of several subsystems whose dynamic characteristics must be brought into agreement with each other in optimal way. The purpose of this work is to develop mathematical dependences for calculation of dynamic characteristics. The functional arrangement of the drive is considered consisting of jet motor based on Segner wheel with de Laval nozzle, mechanical transmission, pneumatic distributing device – jet pipe controlled by electromechanical converter. The layout is presented of mechanical segment of servo drive with jet motor with screw-nut transmission. The dynamic model is presented and the algebraic relations to determine natural frequencies of the drive are given. The motion equations of output rod at full composition of load are given. Using Lagrange transformation as applied to ball screw transmission, the expression for reduced mass of output element was derived. The reduced mass of load depends on the jet motor design and exerts basic influence on the drive’s natural frequencies. The evaluation is given of reduced mass change from the jet motor moment of inertia and reducer transmission coefficient. Based on the proposed algorithms, the dynamic characteristics of servo drive were constructed: transient process and amplitude-frequency characteristic. The drive has relatively low pass band, which is explained by the value of reduced mass of load.

Key words: pneumatic drive, functional arrangement, hydrodynamic force, reduced mass, Lagrange transformations, ball screw transmission, transient process, frequency characteristic

Bibliography:
1. Pnevmoprivod system upravleniya letatelnykh apparatov /V. A. Chaschin, O. T. Kamladze, A. B. Kondratiev at al. M., 1987. 248 s.
2. Berezhnoy A. S. Sovershenstvovanie rabochikh characteristic struino-reaktivnogo pnevmoagregata na osnove utochneniya modeli rabochego processa: dis. cand. techn. nauk: 05.05.17. Zaschischena 03.10.14. Sumy, 2014. 157 s.
3. Oleinik V. P., Yelanskiy Yu. A., Kovalenko V. N. et al. Staticheskie characteristiki gazovogo privoda so struinym dvigatelem /Kosmicheskaya technika. Raketnoe vooruzhenie: Sb. nauch.-techn. st. 2016. Vyp. 2. S. 21-27.
4. Abramovich G. N. Prikladnaya gazovaya dynamika. M., 1976. 888 s.
5. Strutinskiy V. B. Matematichne modelyuvannya processiv ta system mechaniki. Zhitomir, 2001. 612 s.
6. Shalamov A. V., Mazein P. G. Dynamicheskaya model’ sharikovintovoi pary/ Izv. Chelyabinskogo nauchnogo centra UrO RAN. №4. Chelyabinsk, 2002. S.161-170.
7. Kripa K.Varanasi, Samir A. Nayfer. The Dynamics of Lead-Screw Drivers: Low-Order Modeling and Experiments /Journal of Dynamic System, Measurement and Control. June 2004. Vol. 126. P. 388-395. https://doi.org/10.1115/1.1771690

Full text (PDF) || Content 2019 (2)

Downloads: 46
Abstract views: 
2044
Dynamics of article downloads
Dynamics of abstract views
Downloads geography
CountryCityDownloads
USA Boardman; Matawan; Baltimore; Boydton; Plano; Miami; Detroit; Phoenix; Phoenix;; Monroe; Ashburn; Ashburn; Seattle; Seattle; Seattle; Ashburn; Ashburn; Seattle; Seattle; Portland; San Mateo; San Mateo; Des Moines; Des Moines; Boardman; Boardman; Ashburn28
Singapore Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore8
Canada Toronto; Monreale2
Iraq Erbil1
Finland Helsinki1
France1
Germany Falkenstein1
Romania Voluntari1
Netherlands Amsterdam1
Unknown1
Ukraine Dnipro1
Downloads, views for all articles
Articles, downloads, views by all authors
Articles for all companies
Geography of downloads articles
10.2.2019 Dynamic performance of the gas drive with jet motor
10.2.2019 Dynamic performance of the gas drive with jet motor
10.2.2019 Dynamic performance of the gas drive with jet motor

Keywords cloud

Your browser doesn't support the HTML5 CANVAS tag.
]]> 8.2.2018 Development of Nozzle Blocks New Manufacturing Technology without Blazing https://journal.yuzhnoye.com/content_2018_2-en/annot_8_2_2018-en/ Thu, 07 Sep 2023 11:21:51 +0000 https://journal.yuzhnoye.com/?page_id=30757
Development of Nozzle Blocks New Manufacturing Technology without Blazing Authors: Kovalenko A. Content 2018 (2) Downloads: 34 Abstract views: 1078 Dynamics of article downloads Dynamics of abstract views Downloads geography Country City Downloads USA Boardman; Matawan; Baltimore; Plano; Columbus; Phoenix; Monroe; Ashburn; Columbus; Ashburn; Seattle; Tappahannock; Portland; Portland; San Mateo; Des Moines; Boardman; Ashburn; Ashburn 19 Singapore Singapore; Singapore; Singapore; Singapore; Singapore; Singapore 6 Finland Helsinki 1 Unknown 1 India Shillong 1 Mongolia 1 Canada Monreale 1 Germany Falkenstein 1 Romania Voluntari 1 Netherlands Amsterdam 1 Ukraine Dnipro 1 Downloads, views for all articles Articles, downloads, views by all authors Articles for all companies Geography of downloads articles Kovalenko A. Development of Nozzle Blocks New Manufacturing Technology without Blazing Автори: Kovalenko A.
]]>

8. Development of Nozzle Blocks New Manufacturing Technology without Blazing

Authors:

Kovalenko A. M.1, Kirsanov D. V.1, Mirosidi M. A.1, Shelyagin V. D.2, Bernatsky A. V.2, Siora O. V.2

Organization:

Yangel Yuzhnoye State Design Office, Dnipro, Ukraine1; STC «Paton Welding Institute», Kiev, Ukraine2

Page: Kosm. teh. Raket. vooruž. 2018 (2); 68-75

DOI: https://doi.org/10.33136/stma2018.02.068

Language: Russian

Annotation: The article describes the problems of manufacturing large-size nozzle blocks by classical for Ukrainian space industry method of high-temperature brazing. The Yuzhnoye SDO-selected way of solving this problem and the first strides on the way to organization of new production using innovative technologies of laser welding and surfacing are presented. The step-by-step sequence and procedure of research work to develop and test a new technology of cooled nozzle block manufacturing are described. Four phases are identified, out of which the first two phases have already been successfully performed. The laser welding and surfacing technology will allow avoiding the use of costly and unique equipment and will allow reducing and optimizing the technological manufacturing cycle rejecting the long –term and energy-consuming technological operations. The scientific-and-technological works performed showed the principle feasibility of making connection between the external jacket and internal wall of a nozzle block using laser welding. The test samples manufactured confirmed the high strength characteristics, which had been preliminary obtained by the theoretical calculation methods. The sections obtained by surfacing demonstrate good metallurgical connection between the layers. On the test samples, the technique was tried-out allowing repairing defect areas in a welded seam obtained by laser welding method. This is especially important from the technological and economic viewpoints, as the technology of high-temperature brazing applied currently does not allow making guaranteed repair of brazed joints.

Key words: liquid rocket engine nozzles, laser, laser welding, laser surfacing

Bibliography:

Full text (PDF) || Content 2018 (2)

Downloads: 34
Abstract views: 
1078
Dynamics of article downloads
Dynamics of abstract views
Downloads geography
CountryCityDownloads
USA Boardman; Matawan; Baltimore; Plano; Columbus; Phoenix; Monroe; Ashburn; Columbus; Ashburn; Seattle; Tappahannock; Portland; Portland; San Mateo; Des Moines; Boardman; Ashburn; Ashburn19
Singapore Singapore; Singapore; Singapore; Singapore; Singapore; Singapore6
Finland Helsinki1
Unknown1
India Shillong1
Mongolia1
Canada Monreale1
Germany Falkenstein1
Romania Voluntari1
Netherlands Amsterdam1
Ukraine Dnipro1
Downloads, views for all articles
Articles, downloads, views by all authors
Articles for all companies
Geography of downloads articles
8.2.2018 Development of Nozzle Blocks New Manufacturing Technology without Blazing
8.2.2018 Development of Nozzle Blocks New Manufacturing Technology without Blazing
8.2.2018 Development of Nozzle Blocks New Manufacturing Technology without Blazing

Keywords cloud

Your browser doesn't support the HTML5 CANVAS tag.
]]> 20.2.2017 Research Support for Development of Launch Vehicle Payload Unit Composite Load-Bearing Compartments https://journal.yuzhnoye.com/content_2017_2/annot_20_2_2017-en/ Wed, 09 Aug 2023 12:26:27 +0000 https://journal.yuzhnoye.com/?page_id=29866
Problems and Prospects. Use of Polymer Composite Materials in Space Rockets as Reserve of Increasing their Mass and Functional Effectiveness. Dmitrenko, K. Problems of Designing and Manufacturing Flying Vehicle Structures: Collection of scientific works of N. Smerdov A. Problems of Designing and Manufacturing Flying Vehicle Structures: Collection of scientific works of N. Kovalenko et al.; Applicant and patent holder NVF Dniprotechservice, Yuzhnoye SDO. Manufacturing Technology of Cyclone-4 Launch Vehicle Experimental Large-Sized Interstage Bay Made of Carbon Plastics / А. Problems of Designing and Manufacturing Flying Vehicle Structures: Collection of scientific works of N. Static Tests of Cyclone-4 Launch Vehicle Experimental Interstage Bay Made of Carbon Plastic / А.
]]>

20. Research Support for Development of Launch Vehicle Payload Unit Composite Load-Bearing Compartments

Authors:

Potapov O. М.1, Kovalenko V. O.1, Kondrat’ev А. V.2, Gaidachuk V. Е.2

Organization:

Yangel Yuzhnoye State Design Office, Dnipro, Ukraine1; Kharkiv Aviation Institute, Kharkiv, Ukraine2 

Page: Kosm. teh. Raket. vooruž. 2017 (2); 112-120

Language: Russian

Annotation: Some main results of scientific support of development of launch vehicle head module composite loadbearing bays are presented. The methodology is proposed for developing these units. By the example of payload fairing and interstage bay of Cyclone-4 launch vehicle, high efficiency is shown of proposed methodology implementation when selecting their rational design and technological parameters.

Key words:

Bibliography:
1. Degtyarev A. V. Rocket Technology. Problems and Prospects. Selected scientific-technical publications. Dnepropetrovsk, 2014. 420 p.
2. Kovalenko V. A., Kondrat’yev A. V. Use of Polymer Composite Materials in Space Rockets as Reserve of Increasing their Mass and Functional Effectiveness. Aerospace Engineering and Technology. 2011. No. 5 (82). P. 14-20.
3. Kondrat’yev A. V. et al. Analysis of Nomenclature of Type Composite Units of Space Rockets and Structural Schemes Applied for them / A. V. Kondrat’yev, A. G. Dmitrenko, K. D. Stenile, А. А. Tsaritsynsky. Problems of Designing and Manufacturing Flying Vehicle Structures: Collection of scientific works of N. E. Zhukovsky Aerospace University “KhAI”. Issue 3 (79). Kharkiv, 2014. P. 19 – 30.
4. Potapov A. M. et al. Comparison of Payload Fairings of Existing and Prospective Domestic Launch Vehicles and their Foreign Analogs / А. М. Potapov, V. A. Kovalenko, A. V. Kondrat’yev. Aerospace Engineering and Technology. 2015. No. 1(118). P. 35 – 43.
5. Gaidachuk A. V. et al. Methodology of Developing Effective Design and Technological Solutions of Space Rocketry Composite Units: Monography in 2 volumes. Vol. 2. Synthesis of Space Rocketry Composite Units Parameters at Heterogeneous Loading / A. V. Gaidachuk, V. E. Gaidachuk, A. V. Kondrat’yev, V. A. Kovalenko, V. V. Kirichenko, А. M. Potapov / Under the editorship of A. V. Gaidachuk. Kharkiv, 2016. 250 p.
6. Gaidachuk A. V. et al. Methodology of Developing Effective Design and Technological Solutions of Space Rocketry Composite Units: Monography in 2 volumes. Vol. 1. Creation of Space Rocketry Units with Specified Quality of Polymer Composite Materials / A. V. Gaidachuk, V. E. Gaidachuk, A. V. Kondrat’yev, V. A. Kovalenko, V. V. Kirichenko, А. M. Potapov / Under the editorship of A. V. Gaidachuk. Kharkiv, 2016. 263 p.
7. Smerdov A. A. Development of Methods to Design Space Rocketry Composite Materials and Structures: Dissertation of Doctor of Engineering Science: 05.07.02, 05.02.01. М., 2007. 410 p.
8. Slyvyns’kyy V. et al. Basic parameters’ optimization concept for composite nose fairings of launchers / V. Slyvyns’kyy, V. Gajdachuk, V. Kirichenko, A. Kondratiev. 62nd International Astronautical Congress, IAC 2011 (Cape Town, 3-7 October 2011). Red Hook, NY: Curran, 2012. Vol. 9. P. 5701-5710.
9. Gaidachuk V. E. et al. Optimization of Cyclone-4 Launch Vehicle Payload Fairing Design Parameters / V. E. Gaidachuk, V. I. Slivinsky, A. V. Kondrat’yev, A. P. Kushnar’ov, Effectiveness of Honeycomb Structures in Aerospace Products: Proceedings of III International Scientific-Practical Conference (Dnepropetrovsk, 27-29 May 2009). Dnepropetrovsk, 2009. P. 88 – 95.
10. Zinov’yev A. M. et al. Design and Technological Solution and Carrying Capacity of Cyclone-4 Launch Vehicle Interstage Bay Made of Polymer Composite Materials / А. М. Zinov’yev, А. P. Kushnar’ov, A. V. Kondrat’yev, А. М. Potapov, А. P. Kuznetsov, V. A. Kovalenko. Aerospace Engineering and Technology. 2013. No. 3 (100). P. 46-53.
11. Karpov Y. S. Connection of Parts and Units Made of Composite Materials: Monography. Kharkiv, 2006. 359 p.
12. Kondrat’yev A. V. Mass Optimization of Launch Vehicle Payload Fairing Irregular Zones. Problems of Designing and Manufacturing Flying Vehicle Structures: Collection of scientific works of N. E. Zhukovsky Aerospace University “KhAI”. Issue 47 (4). Kharkiv, 2006. P. 126 – 133.
13. Degtyarev A. V. et al. Evaluation of Carrying Capacity of Launch Vehicle Bays Separation System Composite Fitting / A. V. Degtyarev, A. P. Kushnar’ov, V. V. Gavrilko, V. A. Kovalenko, А. V. Kondrat’yev, А. М. Potapov. Space Technology. Missile Armaments: Collection of scientific-technical articles. 2013. Issue 1. P. 18-21.
14. Patent 81537 UA, MPK (2013.01) F42B 15/36 (2006.01) B64D 1/00 Fitting of Rocket’s Three-Layer Shell / О. М. Zinov’yev, О. P. Kuznetsov, V. V. Gavrilko, О. М. Potapov, V. O. Kovalenko et al.; Applicant and patent holder NVF Dniprotechservice, Yuzhnoye SDO. No. u 2012 11210; Claimed 27.09.2012; Published 10.07.13, Bulletin 13. 4 p.
15. Zinov’yev A. M. et al. Manufacturing Technology of Cyclone-4 Launch Vehicle Experimental Large-Sized Interstage Bay Made of Carbon Plastics / А. M. Zinov’yev, А. P. Kushnar’ov, А. V. Kondrat’yev, А. М. Potapov, А. P. Kuznetsov, V. A. Kovalenko. Problems of Designing and Manufacturing Flying Vehicle Structures: Collection of scientific works of N. E. Zhukovsky Aerospace University “KhAI”. Issue 2 (74). Kharkiv, 2013. P. 7 – 17.
16. Zinov’yev A. M. et al. Static Tests of Cyclone-4 Launch Vehicle Experimental Interstage Bay Made of Carbon Plastic / А. М. Zinov’yev, А. P. Kushnar’ov, А. V. Kondrat’yev, А. М. Potapov, А. P. Kuznetsov, V. A. Kovalenko. Aerospace Engineering and Technology. 2013. No. 4(101). P. 28-35.

Full text (PDF) || Content 2017 (2)

Downloads: 46
Abstract views: 
1255
Dynamics of article downloads
Dynamics of abstract views
Downloads geography
CountryCityDownloads
USA Matawan; Baltimore; Columbus; Phoenix; Phoenix; Phoenix; Monroe; Ashburn; Seattle; Seattle; Ashburn; Seattle; Seattle; Tappahannock; Ashburn; Portland; Portland; San Mateo; San Mateo; San Mateo; Des Moines; Boardman; Boardman; Ashburn; Boardman25
Singapore Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore13
Canada Toronto; Monreale2
China Shanghai1
Finland Helsinki1
Germany Falkenstein1
Romania Voluntari1
Netherlands Amsterdam1
Ukraine Dnipro1
Downloads, views for all articles
Articles, downloads, views by all authors
Articles for all companies
Geography of downloads articles
20.2.2017 Research Support for Development of Launch Vehicle Payload Unit Composite Load-Bearing Compartments
20.2.2017 Research Support for Development of Launch Vehicle Payload Unit Composite Load-Bearing Compartments
20.2.2017 Research Support for Development of Launch Vehicle Payload Unit Composite Load-Bearing Compartments
]]> 26.1.2019 New Technologies and Problems of Their Introducing in Ukraine https://journal.yuzhnoye.com/content_2019_1-en/annot_26_1_2019-en/ Wed, 24 May 2023 16:01:10 +0000 https://journal.yuzhnoye.com/?page_id=27731
New Technologies and Problems of Their Introducing in Ukraine Authors: Kovalenko A. Content 2019 (1) Downloads: 44 Abstract views: 733 Dynamics of article downloads Dynamics of abstract views Downloads geography Country City Downloads USA Boardman; Matawan; Boydton; Plano; Miami; Dublin; Columbus; Ashburn; Detroit; Phoenix; Phoenix; Los Angeles; Monroe; Ashburn; Ashburn; Seattle; Ashburn; Seattle; San Mateo; San Mateo; Des Moines; Boardman; Boardman; Ashburn 24 Singapore Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore 9 Algeria Annaba 1 Finland Helsinki 1 Unknown 1 Belarus Minsk 1 France 1 Canada Monreale 1 Germany Falkenstein 1 Romania Voluntari 1 Netherlands Amsterdam 1 Lithuania Šiauliai 1 Ukraine Dnipro 1 Downloads, views for all articles Articles, downloads, views by all authors Articles for all companies Geography of downloads articles Kovalenko A.
]]>

26. New Technologies and Problems of Their Introducing in Ukraine

Authors:

Kovalenko A. M., Prokopchuk O. O., Snegiryov I. L.

Organization:

Yangel Yuzhnoye State Design Office, Dnipro, Ukraine

Page: Kosm. teh. Raket. vooruž. 2019, (1); 182-187

DOI: https://doi.org/10.33136/stma2019.01.182

Language: Russian

Annotation: The process of introducing new technologies at Yuzhnoye SDO requires major changes of aerospace products designing methods and project management methods, which allows realizing new opportunities, reducing manufacturing expenses with simultaneous increase of products quality. New software products are presented directed at solving the problems identified when using additive technologies at Yuzhnoye SDO. Such as Autodesk Netfabb, AM Process Simulation, ESI Additive Manufacturing and others that allow optimizing the model for additive technologies through the change of material structure, taking into account and compensation of heat setting during printing propose the tools for creating bionic design. Creation of new technologies of producing cooled nozzle block of LRE chamber without soldering became possible due to integrated approach, with optimal combination of already existing technical solutions with principally new ones, such as laser welding and surfacing. The cost analysis is considered as the most effective optimization method at selection of optimal design and manufacturing technology for its possible implementation at the company. The personnel problem, the issues of quality improvement and labor productivity increase in all production phases are foundational to reduce manufacturing cost.

Key words: additive technologies, software products, optimization, quality

Bibliography:
1. Kovalenko A. N., Kirsanov D. V., Mirosidi N. A., Shelyagin V. D., Bernatskiy A. V., Siora A. V. Razrabotka novoy technologii izgotovleniya soplovykh blokov bez ispolzovaniya paiki/ Kosmicheskaya technika. Raketnoe vooruzhenie: Sb. nauch.-techn. st. Vyp. 2 (116). 2018. Dnepropetrovsk: GP KB «Yuzhnoye». P. 68-75.
2. Jones J. K. Metody proektirovania. M.: Mir, 1986.
3. Nieve Henry R. Prostranstvo doctora Deminga. M.: Alpina Publisher, 2005.

Full text (PDF) || Content 2019 (1)

Downloads: 44
Abstract views: 
733
Dynamics of article downloads
Dynamics of abstract views
Downloads geography
CountryCityDownloads
USA Boardman; Matawan; Boydton; Plano; Miami; Dublin; Columbus; Ashburn; Detroit; Phoenix; Phoenix; Los Angeles; Monroe; Ashburn; Ashburn; Seattle; Ashburn; Seattle; San Mateo; San Mateo; Des Moines; Boardman; Boardman; Ashburn24
Singapore Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore9
Algeria Annaba1
Finland Helsinki1
Unknown1
Belarus Minsk1
France1
Canada Monreale1
Germany Falkenstein1
Romania Voluntari1
Netherlands Amsterdam1
Lithuania Šiauliai1
Ukraine Dnipro1
Downloads, views for all articles
Articles, downloads, views by all authors
Articles for all companies
Geography of downloads articles
26.1.2019 New Technologies and Problems of Their Introducing in Ukraine
26.1.2019 New Technologies and Problems of Their Introducing in Ukraine
26.1.2019 New Technologies and Problems of Their Introducing in Ukraine

Keywords cloud

Your browser doesn't support the HTML5 CANVAS tag.
]]> 17.1.2019 Development of Prospective Small-Size Auxiliary SMR of New Type https://journal.yuzhnoye.com/content_2019_1-en/annot_17_1_2019-en/ Wed, 24 May 2023 16:00:35 +0000 https://journal.yuzhnoye.com/?page_id=27722
, Magdin E. Preliminary results of design and experimental activities, performed in Yuzhnoye SDO, showed the possibility in principle and practicability to develop two new types of advanced small-sized SRE. Kovalenko N. M.: Izd-vo MAH, 2001. Gazodynamicheskie i teplophysicheskie process v raketnykh dvigatelyakh na tverdom toplive. Teploperedacha i hydrodynamicheskoe soprotivlenie. Energoatomizdat, 1990. Opredelenie coeffitsientov teplootdachi pri modelirovanii zadach v Ansys CFX // Primenimost’ modeley turbulentnosti, realizovannykh v Ansys CFX dlya issledovaniya gasodynamiki v schelevom kanale TNA ZhRD. Magdin E. S., Magdin E. S., Magdin E. S., Magdin E. S., Magdin E. S., Magdin E. S., Magdin E.
]]>

17. Development of Prospective Small-Size Auxiliary SMR of New Type

Authors:

Toloch’yants G. E., Mikhailov M. S., Magdin E. K., Oglikh V. V.

Organization:

Yangel Yuzhnoye State Design Office, Dnipro, Ukraine

Page: Kosm. teh. Raket. vooruž. 2019, (1); 114-121

DOI: https://doi.org/10.33136/stma2019.01.114

Language: Russian

Annotation: This article considers essentially new versions of small-sized solid propellant rocket engines (SRE), designed for rocket and spacecraft flight control with serial artillery pyroxiline powder taken as grain and solidpropellant gas generators discretely operating into the receiver. Preliminary results of design and experimental activities, performed in Yuzhnoye SDO, showed the possibility in principle and practicability to develop two new types of advanced small-sized SRE. Testing SRE with pyroxiline powder grain showed that the optimum design of the engine can be developed only with the application of the specially developed design procedure of the gas-dynamic flow pattern of powder gases in the engine chamber with definition of field of pressure and velocity. Such procedure has been developed based on Ansys software package. The article describes areas of further design and experimental activities, fulfilment of which will provide development of production models of the described engines. Intraballistic characteristics design procedure, mentioned in the article, can be used to design new type of micropulse SRE with less than 0.1 s burn time. This article will also facilitate definition of the application area for discrete solid-propellant propulsion systems, where they get the edge over the cold gas gas-jet systems.

Key words: procedure, microSRE, gas-jet system, heat-transfer factor

Bibliography:

1. Kovalenko N. D., Kukushkin V. I. Triumph I tragediya systemy upravleniya vektorom tyagi dvigatelya ZD65 vduvom kamernogo gaza v soplo// Kosmicheskaya technika. Raketnoe vooruzhenie: Sb. nauch.-techn. st. 2014. Vyp. 1. Dnepropetrovsk: GP KB «Yuzhnoye». P. 97-106.
2. Oglykh V. V., Vakhromov V. A., Kirichenko A. S., Kosenko M. G. Razrabotka porokhovykh accumulyatorov davlenia dlya minometnogo starta raket – vazhneishee uslovie ego uspeshnoy realizatsii / Kosmicheskaya technika. Raketnoe vooruzhenie: Sb. nauch.-techn. st. 2016. Vyp. 1. Dnepropetrovsk: GP KB «Yuzhnoye». P. 88-92.
3. Golubev K. S., Svetlov V. G. Proektirovanie zenitnykh upravlyaemykh raket. M.: Izd-vo MAH, 2001. 730 p.
4. Oglykh V. V., Tolochyants G. E., Mikhailov N. S., PopkovV. N. Eksperimentalnye issledovania vozmozhnosti sozdania impulsnogo RDTT s malym vremenem raboty/ Kosmicheskaya technika. Raketnoe vooruzhenie: Sb. nauchn.-techn. st. 2016. Vyp. 2. Dnepr: GP KB «Yuzhnoye». P. 30-34.
5. Belyaev N. M., Belik N. P., Uvarov Ye. I. Reaktyvnye systemy upravleniya kosmicheskykh letatelnykh apparatov. M.: Mashinostroenie, 1979. 232 p.
6. Gubertov A. M., Mironov V. V., Borisov D. M. Gazodynamicheskie i teplophysicheskie process v raketnykh dvigatelyakh na tverdom toplive. M.: Mashinostroenie, 2004.
7. Kutateladze S. S. Teploperedacha i hydrodynamicheskoe soprotivlenie. Energoatomizdat, 1990. 368 p.
8. Scherbakov M. A. Opredelenie coeffitsientov teplootdachi pri modelirovanii zadach v Ansys CFX // Dvigateli i energoustanovki aerokosmicheskykh letatelnykh apparatov: Sb. nauch. statey. M.: Nauch.- techn. Centr im. A. Lyulki, 2014.
9. Moskvichev A. V. Primenimost’ modeley turbulentnosti, realizovannykh v Ansys CFX dlya issledovaniya gasodynamiki v schelevom kanale TNA ZhRD. Voronezhskiy gosudarstvenniy technicheskiy universitet, 2015.
10. Magdin E. K., Oglykh V. V., Rozlivan A. B. Tverdotoplivnaya dvigatelnaya ustanovka orientatsii I stabilizatsii descretnogo deistviya dlya upravleniya kosmicheskimi obiektami / Vestn. dvigatelestroiteley. 2017. Vyp. 2. P. 108-111.

Full text (PDF) || Content 2019 (1)

Downloads: 36
Abstract views: 
912
Dynamics of article downloads
Dynamics of abstract views
Downloads geography
CountryCityDownloads
USA Baltimore;; Plano; Miami; Dublin; Detroit; Phoenix; Monroe; Ashburn; Seattle; Seattle; Ashburn; Seattle; Seattle; Tappahannock; Portland; San Mateo; San Mateo; Des Moines; Boardman; Boardman; Ashburn; Ashburn; Seattle24
Singapore Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore7
India Kolkata1
Germany Falkenstein1
Romania Voluntari1
Netherlands Amsterdam1
Ukraine Dnipro1
Downloads, views for all articles
Articles, downloads, views by all authors
Articles for all companies
Geography of downloads articles
17.1.2019 Development of Prospective Small-Size Auxiliary SMR of New Type
17.1.2019 Development of Prospective Small-Size Auxiliary SMR of New Type
17.1.2019 Development of Prospective Small-Size Auxiliary SMR of New Type

Keywords cloud

Your browser doesn't support the HTML5 CANVAS tag.
]]> 5.1.2016 Scientific-Technical Base for Creation of Detonation Solid Rocket Motors https://journal.yuzhnoye.com/content_2016_1/annot_5_1_2016-en/ Tue, 23 May 2023 12:59:41 +0000 https://journal.yuzhnoye.com/?page_id=27608
Scientific-Technical Base for Creation of Detonation Solid Rocket Motors Authors: Kovalenko N. Content 2016 (1) Downloads: 34 Abstract views: 478 Dynamics of article downloads Dynamics of abstract views Downloads geography Country City Downloads USA Baltimore; Plano; Columbus; Ashburn; Detroit; Phoenix; Phoenix; Monroe; Ashburn; Seattle; Seattle; Ashburn; Tappahannock; San Mateo; Des Moines; Boardman; Boardman; Ashburn; Boardman; Ashburn 20 Singapore Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore 8 Ukraine Dnipro; Dnipro 2 Unknown 1 Germany Falkenstein 1 Romania Voluntari 1 Netherlands Amsterdam 1 Downloads, views for all articles Articles, downloads, views by all authors Articles for all companies Geography of downloads articles Kovalenko M. Scientific-Technical Base for Creation of Detonation Solid Rocket Motors Автори: Kovalenko M. Scientific-Technical Base for Creation of Detonation Solid Rocket Motors Автори: Kovalenko M.
]]>

5. Scientific-Technical Base for Creation of Detonation Solid Rocket Motors

Authors:

Kovalenko N. D.1, Kukushkin V. I.2, Ignat’yev O. D.1, Kirichenko O. О.1

Organization:

The Institute of Technical Mechanics, Dnipro, Ukraine1; SE “PA Yuzhny Machine-Building Plant”, Dnipro, Ukraine2

Page: Kosm. teh. Raket. vooruž. 2016 (1); 34-45

Language: Russian

Annotation: The results of developments and investigations are presented in the field of detonation solid rocket motors (DSRM) conducted jointly by the Institute of Technical Mechanics of the National Academy of Science of Ukraine and State Space Agency of Ukraine (ITM of NASU and SSAU, hereafter ITM) and Yuzhnoye State Design Office (hereafter Yuzhnoye SDO). The physical basis, design peculiarities of DSRM with continuous (not pulsed) operation mode, the test base characteristics, the results of development and firing tests of DSRM test models for some space rocketry items are described. The assessments are made of achieved and prospective levels of DSRM technical characteristics, their application areas and a number of problems requiring solution.

Key words:

Bibliography:

Full text (PDF) || Content 2016 (1)

Downloads: 34
Abstract views: 
478
Dynamics of article downloads
Dynamics of abstract views
Downloads geography
CountryCityDownloads
USA Baltimore; Plano; Columbus; Ashburn; Detroit; Phoenix; Phoenix; Monroe; Ashburn; Seattle; Seattle; Ashburn; Tappahannock; San Mateo; Des Moines; Boardman; Boardman; Ashburn; Boardman; Ashburn20
Singapore Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore; Singapore8
Ukraine Dnipro; Dnipro2
Unknown1
Germany Falkenstein1
Romania Voluntari1
Netherlands Amsterdam1
Downloads, views for all articles
Articles, downloads, views by all authors
Articles for all companies
Geography of downloads articles
5.1.2016 Scientific-Technical Base for Creation of Detonation Solid Rocket Motors
5.1.2016 Scientific-Technical Base for Creation of Detonation Solid Rocket Motors
5.1.2016 Scientific-Technical Base for Creation of Detonation Solid Rocket Motors
]]>