Annotation: The information is presented on the development of nuclear quadrupole resonace thermometry instruments at Yuzhnoye SDO and other Ukrainian companies. The problems are analyzed arising at the creation of standard wide-band nuclear quadrupole resonance temperature meters, the ways to overcome them, and the possibilities of improving due to the use of modern integrated electronics. It is shown that the methods of building the instruments based on nuclear quadrupole resonance proposed and implemented in Ukraine are not inferior to the foreign ones.

Annotation: The paper describes development of the devices for the nuclear quadrupole resonance thermometry at Yuzhnoye SDO and other Ukraine’s enterprises and considers capabilities of the enterprises to manufacture such devices. Also given is refined analytical dependence for temperature calculation using the frequency of the nuclear quadrupole resonance in Bertholette salt within the ±40°C temperature range.

Annotation: This article dwells on results of firing bench testing of the solid-propellant rocket engine (SPRE), fastened to the thrust-measuring assembly stand. It is shown that when engine enters the steady-state mode of operation, plane (forward and rotation) vibrations of the SPRE can take place in the assembly stand due to the sudden pattern of thrust generation and displacement of the center of mass of the vibrating system from the engine axis. These vibrations distort measured values of engine thrust and pattern of its change versus time. The purpose of this work is to simulate the oscillating processes of the engine atop the assembly stand to single out in the distorted values of the measured thrust the components related to the processes in the engine and components, which are introduced into the thrust measurement by the oscillating processes in the system “assembly stand – engine”. Model of vibrating system is suggested, which consists of two rigidly connected bodies, containing elastic links, enabling forward and rotary motion and limited by the rigidity of the links. Mathematical model of the vibrating system is developed. Internal forces and moments acting in oscillatory system are defined. Method of numerical simulation of plane vibrations within the limits of the developed model is suggested. Plane vibrating motion and elastic force curve (curve based on force sensor readings) were simulated in thrust-measuring system for different cases of thrust curve and values of vibrating system parameters. Resonance condition was simulated and mutual influence of elastic parametrical link between forward and rotary vibrations was established. Impact of thrust-measuring system rigidity on peak values of force sensor readings was found out. Elastic force vibrations in thrust-measuring system with vibrating system parameters were simulated including variant of thrust change versus time, implemented during firing bench tests of one of the SPRE. It is shown that registered simulation results recreate thrust measurement results in pattern and values obtained by the force sensor during the firing bench tests, and owing to this, it was concluded that oscillating process parameters, assumed in the model, meet the actual ones. It is concluded that simulation provides objective interpretation of the thrust curve, reliable and comprehensive analysis of engine run during firing bench tests, more detailed and exact design of the assembly stand.