Annotation: In the pneumohydraulic systems of liquid rocket engines and propulsion systems, electromagnetic valves that allow making the pneumohydraulic systems more simple and ensuring multiple ignition of liquid rocket engines have found wide application. The Yuzhnoye-developed electromagnetic valves are designed according to two schemes – of direct and indirect action. In the direct-action electromagnetic valves, the shutting-off device opens (closes) the throat with the force developed by electric magnet. They have gained acceptance in the pneumohydraulic systems with the working medium pressure of ~8.5 MPa, they are of simple design and have high operating speed (0.001…0.05 s). In the electromagnetic valves with amplification, the electromagnet armature is connected with control valve and the main shutting-off device moves due to the force from working medium pressure drop on it. They are used in the operating pressure range of 0.5…56 MPa, at that, the action time is 0.025…0.15 s. For the European Vega launch vehicle fourth stage main engine assembly that has pressure propellant feeding system, the electrohydraulic valve with amplification and drainage was developed. The dependence of this electrohydraulic valve high speed from the line’s output length is decreased to the maximum due to the installation of Venturi nozzle at the output connecting branch. This electrohydraulic valve is operable at the pressure below 8 MPa, the action time is 0.08…0.12 s. The present-day spacecraft gas-jet orientation and stabilization systems use as propulsion devices the electromagnetic valves with nozzles whose thrust is, as a rule, not more than 30 N and the working medium pressure is up to 24 MPa. Yuzhnoye State Design Office developed for 15B36 gas-jet system the electropneumatic valve with amplification and nozzle, which is operable at the pressure below 45 MPa, ensures the action frequency of up to 10 Hz and is capable of creating the thrust of 100 N on gaseous argon. To solve the task of decreasing the dependence of operability and high speed of electromagnetic valves with drainage and amplification on geometry of lines in which a valve is installed, the electropneumatic valve was developed that has spool elements ensuring reliable and quick action with long input lines of 0.004 m diameter. Its mass is 2…2.5 times lower than the mass of analogs. Recently, Yuzhnoye State Design Office develops the apogee RD840 LRE with 400 N thrust, for the conditions of which the direct-action electrohydraulic valve was developed and tested with the following characteristics: pressure – up to 2.15 MPa, consumed power in operation mode – less than 7.1 W, action time – not more than 0.02 s, mass – 0.19 kg. The presented electromagnetic valves by their technical and operational characteristics meet the highest world requirements and have found wide utility in liquid rocket engines and propulsion systems.

Annotation: The Ukrainian companies Yuzhnoye SDO and SE PA YMZ supply VG143 main engine assembly for Vega LV AVUM upper stage, which is a one-chamber LRE of 250 kg thrust with five ignitions in flight. By the present, 11 successful launches of Vega LV have been made. In the process of flight operation, there were no critical comments on engines operation. This LRE has a combination of attractive characteristics, such as high specific pulse, low mass, multiple ignitions in flight, high reliability confirmed by good results of flight test of the prototype engines. The reserve of this engine from the viewpoint of further modernization is far from being exhausted. Enhancing the capabilities of payload injection by launch vehicles into various orbits of artificial Earth satellites is the main task for the developers of ILV as a whole and for the developers of separate assemblies and systems, such as LRE being part of ILV. With consideration for the experience of prototype engines testing, we should note the following ways of main engine assembly modernization: – increasing the specific pulse due to the increase of nozzle expansion ratio; – decreasing the volume of internal manifolds and mass of chamber; – increasing the operation time; – increasing the ignitions number; – increasing the duration of pauses between ignitions and orbital functioning time. Increasing the thrust and specific pulse of Vega LV VG143 main engine assembly and AVUM stage takes place due to the use of pneumopump propellant feeding system instead of standard pressure feeding. Besides, the information is presented on RD859, RD864, RD866 and RD869 prototype engines, the data on their basic characteristics, testing and operation. The below information is of interest to LRE and LV developers.

Annotation: One of the important directions in the development of Yuzhnoye SDO liquid rocket engines is creation of the engines for launch vehicle upper stages, boosters, space tugs and takeoff-and-landing vehicles. The article presents an overview of Yuzhnoye SDO – developed liquid rocket engines, their basic characteristics, distinctive features and the current status of development and operation. The article presents the information on the following engines: RD858 and RD859 operating on storable propellants, for lunar takeoff-and-landing Block E module; RD809M and RD809K operating on liquid oxygen + kerosene created on the basis of RD8 serial control engine of Zenit launch vehicle second stage. In this case, RD809M engine is RD8 version with tight integration and RD809K engine is its one-chamber version; RD805 engine operating on liquid oxygen + kerosene created on the basis of combustion chamber of RD8 serial control engine of Zenit launch vehicle second stage.; RD835 engine operating on liquid oxygen + kerosene created for the second stages of launch vehicles of Mayak type; the engines and propulsion systems operating on storable propellants, such as RD861K (main engine of Cyclone-4 third stage and Cyclone-4M launch vehicle second stage), DU802 (liquid propulsion system of Krechet autonomous space tug of conversion Dnepr launch vehicle), RD840 (apogee liquid rocket engine of liquid propulsion system of geostationary communication satellite bus), VG143 (main engine assembly of the fourth stage of European Vega launch vehicle), RD864 and RD869 (main engines of Dnepr launch vehicle upper stages). The information presented in the article is of interest to liquid rocket engines and launch vehicles developers.