Annotation: In the present-day rocket engineering, the liquid rocket engines with pump feed system have gained wide acceptance. As a rule, the pumps used in liquid rocket engines are screw-axifugal. The screw serves to increase pressure upstream of the axifugal wheel, thus ensuring its cavitation-free operation. The screws used in the screw-axifugal pumps of liquid rocket engines may be of two types: with constant and variable step. The screws with constant step are easier to calculate, profile and manufacture as compared to the screws with variable step. As known from the literature, the use of the screw with variable step increases power characteristics of the screw-axifugal pump. The purpose of investigation is comparative analysis of cavitation and power characteristics of the following high-speed low-consumption screw-axifugal pumps of liquid rocket engines with jointed screws, screws of constant and variable step:  RD868 engine oxidizer and fuel pumps;  RD859 engine fuel pumps;  RD861K engine fuel pumps. Besides, the analysis has been made of the impact of design features and geometrical dimensions of the screws with variable and constant step on power characteristics of the screw-axifugal high-speed lowconsumption pumps of liquid rocket engines. Special attention has been given to the analysis of anticavitation properties of the pumps with screws of variable step and pumps with jointed screws. Based on the results of investigation, it has been ascertained that when using the joint screws and screws with variable step instead of the screws with constant step in the high-speed low-consumption screw-axifugal pumps of liquid rocket engines, the pump delivery head increases from 0.65 to 3.83%, the efficiency increases up to 1.7%. The use of jointed screw and screw of variable step as compared with the screw of constant step does not have any impact on cavitation properties of low-consumption crew-axifugal pumps of liquid rocket engines.

Annotation: The article presents the experience of creating LRE turbopump units by the Rocket Engines Design Office (DO-4) at Yuzhnoye SDO. The best known turbopump units designs developed by DO are described. Both earlier developments of DO and the turbopump unit being now in final testing phase are considered. The design evolution of both separate assemblies and of entire unit is shown. The design evolution allowed increasing the unit’s lifetime dozens times. For example, the lifetime of the first turbopump units developed by DO did not exceed 150 s. Currently, the DO has in stock the engines with lifetime of ~19000 s. The information is presented on the problems that the designers faced in testing the turbopumop unit and the ways to solve them. The unique achievement are presented. At present, there are no analogs of some units in the world. The article presents the information on the latest achievements of DO, such as the face seal on pump vane discs whose use fully excludes unwanted leaks. Having analyzed the data presented, one may conclude that the Rocket Engines Design Office and Yuzhnoye SDO as a whole accumulated sufficient experience and knowledge allowing solving any problems that may arise when developing a new LRE turbopump unit, and successfully operating LRE with turbopump units, including those in the engines with generator gas afterburning created in recent years testify to a great value of accumulated experience.

Annotation: The Ukrainian companies Yuzhnoye SDO and SE PA YMZ supply VG143 main engine assembly for Vega LV AVUM upper stage, which is a one-chamber LRE of 250 kg thrust with five ignitions in flight. By the present, 11 successful launches of Vega LV have been made. In the process of flight operation, there were no critical comments on engines operation. This LRE has a combination of attractive characteristics, such as high specific pulse, low mass, multiple ignitions in flight, high reliability confirmed by good results of flight test of the prototype engines. The reserve of this engine from the viewpoint of further modernization is far from being exhausted. Enhancing the capabilities of payload injection by launch vehicles into various orbits of artificial Earth satellites is the main task for the developers of ILV as a whole and for the developers of separate assemblies and systems, such as LRE being part of ILV. With consideration for the experience of prototype engines testing, we should note the following ways of main engine assembly modernization: – increasing the specific pulse due to the increase of nozzle expansion ratio; – decreasing the volume of internal manifolds and mass of chamber; – increasing the operation time; – increasing the ignitions number; – increasing the duration of pauses between ignitions and orbital functioning time. Increasing the thrust and specific pulse of Vega LV VG143 main engine assembly and AVUM stage takes place due to the use of pneumopump propellant feeding system instead of standard pressure feeding. Besides, the information is presented on RD859, RD864, RD866 and RD869 prototype engines, the data on their basic characteristics, testing and operation. The below information is of interest to LRE and LV developers.

Annotation: One of the important directions in the development of Yuzhnoye SDO liquid rocket engines is creation of the engines for launch vehicle upper stages, boosters, space tugs and takeoff-and-landing vehicles. The article presents an overview of Yuzhnoye SDO – developed liquid rocket engines, their basic characteristics, distinctive features and the current status of development and operation. The article presents the information on the following engines: RD858 and RD859 operating on storable propellants, for lunar takeoff-and-landing Block E module; RD809M and RD809K operating on liquid oxygen + kerosene created on the basis of RD8 serial control engine of Zenit launch vehicle second stage. In this case, RD809M engine is RD8 version with tight integration and RD809K engine is its one-chamber version; RD805 engine operating on liquid oxygen + kerosene created on the basis of combustion chamber of RD8 serial control engine of Zenit launch vehicle second stage.; RD835 engine operating on liquid oxygen + kerosene created for the second stages of launch vehicles of Mayak type; the engines and propulsion systems operating on storable propellants, such as RD861K (main engine of Cyclone-4 third stage and Cyclone-4M launch vehicle second stage), DU802 (liquid propulsion system of Krechet autonomous space tug of conversion Dnepr launch vehicle), RD840 (apogee liquid rocket engine of liquid propulsion system of geostationary communication satellite bus), VG143 (main engine assembly of the fourth stage of European Vega launch vehicle), RD864 and RD869 (main engines of Dnepr launch vehicle upper stages). The information presented in the article is of interest to liquid rocket engines and launch vehicles developers.